763-531-2222
|
763-531-2222 |
|
  
|
        
|
Electronic Integration, Controllers & Recorders
Acromag
Signal Conditioners and ConvertersModbus Systems Lonworks I/O Systems Martel Electronics
LC100 Precision Loop CalibratorTuff-Tools T100 Single Function Voltage, Frequency & Milliamp Calibrators MS-420 Mini-Source Portable Calibrator IVC-222HPII Voltage/Current Calibrator Modus
Power SuppliesSiemens
ControllersWilkerson
Signal Conditioners and ConvertersMueller Electronic Integration, Controllers, and Recorders Supplier Listing Signal Conditioners and Converters
Acromag Intellipack series signal conditioners are multi-function I/O devices. Intellipack signal conditioners have universal input / output ranges and an intelligent microcontroller. Each Intellipack module supports multiple I/O configurations,
so operators can manage all applications with only a few units. This helps reduce your spare parts inventory.Intellipack modules are easily configured using a Windows-based software program. After initial configuration Intellipack’s are easily adjusted in the field with standard calibrators. No PC required. Easy-to-access push buttons on the front panel make changes to setpoints, deadbands, and zero / full-scale values simple. Features
Modbus Systems
Acromag BusWorks 900 mb Series is a line of multi-function Modbus I /O units. Intelligent microprocessor microcontrollers power the BusWorks 900 mb Series providing excellent monitoring and controlling capabilities.
Features
Lonworks I/O Systems
Acromag SmartPack Lonworks I/O systems are connected by single twist pair cable. There is less “home run” wiring required and the need for a central PLC is eliminated.
The cost and effort to maintain your control system can be significantly reduced with a well-planned Lonworks / SmartPack design. Wiring complexity is significantly simplified with these systems.
Features
LC100 Precision Loop Calibrator
The Martel Electronics LC-100 Precision Loop Calibrator has an accuracy of 0.015% of reading, with 0.001 mA resolution. The Martel LC-100 can simulate, power, and measure two-wire transmitters. With automatic Step and Ramp functions, the LC-100 enables remote calibration of 4-20 mA devices.Features 
Tuff-Tools T100 Single Function Voltage, Frequency & Milliamp Calibrators
The Tuff-Tools family consists of 3 Process Signal calibrators (mA, Volts, Frequency), 2 Temperature calibrators (T/C, RTD) and a Pressure calibrator available in several ranges (200" H 2 O, 30 PSI, 100 PSI).Features 
** 0 to 18°C and 28°C to 50°C
Martel Tuff-Tools T100 Single Function Voltage, Frequency & Milliamp Calibrators Data Sheet
(PDF Format) MS-420 Mini-Source Portable Calibrator
Martel Electronics' MS-420 MiniSource Process Calibrator has the ability to calibrate or troubleshoot any 4 mA to 20 mA loop device. A single pushbutton allows the user to select one of the 5 current outputs (4, 8, 12, 16 or 20 mA) which can drive up to 300 ohms, or act as a 2-wire simulator with an external loop power supply of up to 30 VDC.Applications 
IVC-222HPII Voltage/Current Calibrator
Martel Electronics' IVC-222HPII is a general purpose current and voltage source. It combines the latest digital and analog circuitry to achieve its rated specifications in a small, reliable package.Features 
Power Supplies
Modus power supplies are available in three versions. These small AC to DC power supplies are well suited for powering control instruments and transmitters because they are conservatively rated and do not require derating.
Siemens Controller Content
DR19 Controllers
Siemens Sipart DR19 is a digital controller. It is commonly used in device manufacturing and mechanical engineering. Sipart DR19 directly connects to temperature sensors including: thermocouples, thermometers (RTD), resistance based sensors, and mV voltage signals. Sipart DR19 can be used as a:DR20 Controllers
Siemens Sipart DR20 controllers work as simple control loops as well as for solving complex control tasks. The controller incorporates into a central operation, can be monitored by a PC, or work stand-alone. Additionally, the DR20 can be set-up as a ratio station, process indicator or manual / automatic control station. The DR20 is available as a:DR21 Controllers
Siemens Sipart DR21 units are digital controllers. Standard functions for process engineering are built-in to the DR21’s internal program memory. Users do not need programming knowledge to access a function and execute it. The DR21 can be used as a:DR22 Controller
Siemens Sipart DR22 Controller is a digital operating instrument with a “top class” performance. Process engineering functions are built-in to the DR22’s internal program memory. Users do not need programming knowledge to complete a function. If necessary, function blocks for mathematical and logic functions can be easily added to enable adaptation to complex tasks. The DR22 has an adaptation procedure that automatically determines the optimal parameters for stable control. The Sipart DR22 can be used as:DR24 Controller
Siemens Sipart DR24 is used in process engineering applications to calculation, closed-loop and open loop control. No programming knowledge is required to operate the unit. The Sipart DR24 can be connected to higher level automation systems, control systems, or process computers.
Applications
Signal Conditioners and Converters
DM3801
DC input proportional valve driver pulse width modulated output
Wilkerson DM3801 valve driver provides a bipolar current drive to a current controlled valve. The valve driver resides in an aluminum DIN rail mountable case and has a stainless steel mounting plate. The front panel is plastic. Features include:
DM4001
RTD input, isolated field rangeable transmitter
Wilkerson Model DM4001 provides an isolated voltage or current output proportional to temperature as measured with an RTD. The product can measure 2, 3, or 4 wire resistance elements. The DM4001 includes filtering and conditioning to reduce susceptibility to transients and noisy operations. Connections are made via two 4-pin plug-in terminal blocks. These terminal blocks allow the product to be removed without unwiring the connections. Features include:DM4003
Wilkerson Model DM4003 creates an isolated voltage or current output proportional to the position of a potentiometer wiper. The output is isolated from input, line power and ground. The unit helps eliminate ground loops and common mode signals. Features include:DM4051
Wilkerson DM4051 provides an isolated voltage or current output proportional to a strain gauge (bridge) input. The field rangeable product provides 10V excitation and has gold plated jumpers to select the following ranges and functions:
DM4130
Wilkerson Model DM4130 provides an isolated voltage or current output proportional to temperature as measured with a thermocouple. Any thermocouple may be used, and types J, K, R, S, T, E, and N can be linearized. Features include:DM4300A/4300A-HS
DC input fixed range isolated transmitter
Wilkerson Model DM4300A is a fixed range DC to DC isolator that creates an isolated current or voltage output proportional to a current or voltage input. A high-speed DM4300A version is also available. Features include:DM4380A
DC input field rangeable isolated transmitter
Wilkerson Model DM4380A creates a DC output proportional to a DC input. The output is fully isolated from input, line power, and ground. The unit is useful in eliminating ground loops and common mode signals. Features include:DM4391
4 to 20 MA input/output loop powered isolator
Wilkerson Model DM4391 is a loop-powered isolator that provides an isolated 4/20 mA output proportional to a 4/20 mA input. The circuit’s operating power comes from the 4/20 mA input current. DM4391 applications include breaking ground loops and making 4/20 mA output in locations where primary power is not available. Features include:DM6010
AC true RMS input, isolated field rangeable transmitter
Wilkerson Model DM6010 provides an isolated voltage or current output proportional to the RMS value of an AC voltage or current input. The true RMS measurement capability allows accurate measurements of distorted sine wave sources as well as complex wave shapes such as a phase angle modulated SCR drive output. Features include:DM7010
Frequency input field rangeable isolated transmitter
Wilkerson Model DM7010 creates an isolated voltage or current output proportional to a frequency input. Because DM7010 has a wide input voltage range it can be used with low level magnetic pickups, for flow or speed applications, as well as digital signals or direct power line monitoring. Features include: |
               |
Home | Product Catalog | Company Info | Market Info | Career Opportunities | Contact Us | Help | User Agreement |
|||